General: 

 

  • advanced and dynamic sketch of the designed connection model in an editable DXF format, which includes a bill of materials
  • cross-sections for the beam are I-beam sections
  • the orientation of the I-beam section is vertical (flanges subject to compression/tension as a result of a bending moment acting about the stronger axis of inertia)
  • the V and M forces are acting about the stronger axis of inertia of the members (the orientation of the I-beam section is vertical)
  • connection made using beam web side plates and possibly beam flanges cover plates

Side plates: 

 

  • side plates and cover plates are attached to the beams webs and beams flanges, respectively, through a bolted or welded lap connection

Cover plates:

 

  • the use of cover plates is only possible if both connected beams are of equal height

 

 

Module features:

A EuroConnections program module.

 

Connection type BEAM SPLICE with web splice plates and flange cover plates, welded or bolted, verification for sets of uniplanar internal forces, or the full bearing capacity of members.

 

The algorithm for verification of a connection in which both main members are connected via a beam web side plates and possibly beam flanges cover plates, with various possible configurations.


 

BEAM SPLICE connection + DXF

 

Design module for a beam splice connections according to PN-EN 1993-1-8:2006 standard, with DXF drawing generation function.

 

€125.00

          DOWNLOAD PDF

             DOWNLOAD FREE TRIAL

HOME  |  PRODUCTS  |  COMPANY  |  CONTACT  |  FOR RESELLERS

Copyright © 2019 ArCADiasoft